Sl.No Item Name Quantity
1 Screw Chillers, Minimum Capacity 70 TR at 43 Deg C ambient 2Nos.
2 Chilled water pumps, Horizontal end suction, top discharge 2Nos.
3 4" Size, NRVs, PN-16/Class 150 rated, dual plate, with CI body and SS internals. 2Nos.
4 4" Size, Butterfly valves, PN 16/Class 150 rated, wafer design, lever operated, CI/SG iron body, SG iron disc coated with Nylon, SS shaft. 12Nos.
5 4" size, Y-strainer,CI/MS body with brass wire/ SS wire-mesh, PN16/Class 150 rated 2Nos.
6 4"size, Motorised butterfly valves (On-Off type) 2Nos.
7 4" size, Three way flow control valve 1Nos.
8 Temperature gauge, 4"Dial type, complete with capillary, SS Thermowell, all the fittings etc. 6Nos.
9 Pressure gauge, 4" dial size, bourdan movement, all SS internals, complete with all the fittings and isolating ball valve etc. 10Nos.
10 Temperature sensor cum transmitter complete with SS Thermowell, all the fittings etc. 2Nos.
11 Differentail pressure across chillers, complete with all the fittings, piping etc. 2Nos.
12 4" size, MS, C-Class, chilled water line 114m
13 50 mm thick, TF quality Thermocole insulation for 4" MS chilled water line 114m
14 Expansion tank, Capcity: 1000 Ltrs., MOC: MS, insulated 1Nos.
15 Make-up line from expansion tank to higest point in the retrun air line, 2" size, MS - C Class 12m
16 Expansion tank inlet line complete with all the fittings, supports, 1" size,GI - Class B 50m
17 Level switch for expansion tank 1Nos.
18 Ball valve, 1" Size 2Nos.
19 Butterfly valve, 2" Size 1Nos.
20 Drain points, 1" size, complete with all fittings and isolating ball valve. 6Nos.
21 Purge points, 1" size, complete with all fittings and isolating ball valve. 4Nos.
22 Air handling unit,minimum capacity: 8000 CFM 1Sets
23 Differential pressure sensor 2Nos.
24 Thermostat for safety of heaters 2Nos.
25 Anodised Aluminium ducting, 22 gauge (Standard), as per SMACNA complete with supporting arrangements 220Square Metre
26 Volume control dampers in Al construction within ducts to be provided with suitable ducts lever and quadrants. 1Square Metre
27 Supply air grilles/ diffusers in Al construction with volume control dampers with necessary frame work etc. and complete as required. 3.5Square Metre
28 Thermal insulation for supply air duct: Aluminium faced Closed Cell Nitrile rubber, Class ‘O’ fire rating, 38 mm thick 4Square Metre
29 Temperature sensors inside the Chemical store 4Nos.
30 Explosion proof, wall mounting, Exhaust fans, Axial flow, continuous duty, capacity - 1800 CFM at 15 mm WG 2Nos.
31 Explosion proof, wall mounting, Exhaust fans, Axial flow, continuous duty, capacity - 900 CFM at 15 mm WG 4Nos.
32 Installation, Testing and Commissionig of Screw Chillers, Minimum Capacity 70 TR at 43 Deg C ambient 2Nos.
33 Installation, Testing and Commissionig of Chilled water pumps, Horizontal end suction, top discharge 2Nos.
34 Installation, Testing and Commissionig of 4" Size, NRVs, PN-16/Class 150 rated, dual plate, with CI body and SS internals. 2Nos.
35 I/T/C of 4" Size, Butterfly valves, PN 16/Class 150 rated, wafer design, lever operated, CI/SG iron body, SG iron disc coated with Nylon, SS shaft. 12Nos.
36 I/T/C of 4" size, Y-strainer,CI/MS body with brass wire/ SS wire-mesh, PN16/Class 150 rated 2Nos.
37 I/T/C of 4"size, Motorised butterfly valves (On-Off type) 2Nos.
38 I/T/C of 4" size, Three way flow control valve 1Nos.
39 I/T/C of Temperature gauge, 4"Dial type, complete with capillary, SS Thermowell, all the fittings etc. 6Nos.
40 I/T/C of Pressure gauge, 4" dial size, bourdan movement, all SS internals, complete with all the fittings and isolating ball valve etc. 10Nos.
41 I/T/C of Temperature sensor cum transmitter complete with SS Thermowell, all the fittings etc. 2Nos.
42 I/T/C of Differentail pressure sensor across chillers, complete with all the fittings, piping etc. 2Nos.
43 I/T/C OF 4" size, MS, C-Class, chilled water line complete with all the fittings 114m
44 I/T/C OF 50 mm thick, TF quality Thermocole insulation for 4" MS chilled water line complete with all the fittings 114m
45 I/T/C OF Expansion tank, Capcity: 1000 Ltrs., MOC: MS, insulated 1Nos.
46 I/T/C OF Make-up line from expansion tank to higest point in the retrun air line, 2" size, MS - C Class 12m
47 I/T/C OF Expansion tank inlet line complete with all the fittings, supports, 1" size,GI - Class B 50m
48 I/T/C/ OF Level switch for expansion tank 1Nos.
49 I/T/C OF Ball valve, 1" Size 2Nos.
50 I/T/C OF Butterfly valve, 2" Size 1Nos.
51 I/T/C OF Drain points, 1" size, complete with all fittings and isolating ball valve. 6Nos.
52 I/T/C OF Purge points, 1" size, complete with all fittings and isolating ball valve. 4Nos.
53 I/T/C OF Air handling unit,minimum capacity: 8000 CFM 1Sets
54 I/T/C OF Differential pressure sensor across the filters 2Nos.
55 I/T/C of Thermostats for the heaters 2Nos.
56 I/T/C of Anodised Aluminium ducting, 22 gauge (Standard), as per SMACNA complete with supporting arrangements 220Square Metre
57 I/T/C of Volume control dampers in Al construction within ducts to be provided with suitable ducts lever and quadrants. 1Square Metre
58 I/T/C of Supply air grilles/ diffusers in Al construction with volume control dampers with necessary frame work etc. and complete as required. 3.5Square Metre
59 I/T/C of Thermal insulation for supply air duct: Aluminium faced Closed Cell Nitrile rubber, Class ‘O’ fire rating, 38 mm thick 4Square Metre
60 I/T/C of Temperature sensors inside the Chemical store 4Nos.
61 I/T/C OF Explosion proof, wall mounting, Exhaust fans, Axial flow, continuous duty, capacity - 1800 CFM at 15 mm WG 2Nos.
62 I/T/C OF Explosion proof, wall mounting, Exhaust fans, Axial flow, continuous duty, capacity - 900 CFM at 15 mm WG 4Nos.
63 Supply of 3.5Cx150 Sq. mm size Aluminium conductor, XLPE insulated 200m
64 Supply of 4Cx35 sq mm size Aluminium conductor, XLPE insulated 100m
65 Supply of 3Cx 6 Sq. mm size Aluminium conductor, XLPE insulated 100m
66 Supply of 3Cx 10 Sq. mm size Aluminium conductor, XLPE insulated 200m
67 2 Pair Instrumentation cable, XLPE insulated 800m
68 6 Pair Instrumentation cable, XLPE insulated 200m
69 Supply of end termination with brass double compression gland and Aluminium/Cu lugs for 3.5C x 150 sq mm Aluminium (50 mm) size XLPE insulated 6Nos.
70 Supply of end termination with brass double compression gland and Aluminium/Cu lugs for 4 C x 35 sq mm Aluminium (32 mm) size XLPE insulated K 6Nos.
71 Supply of end termination with brass double compression gland and Aluminium/Cu lugs for 3 C x 6 sq mm Aluminium size XLPE insulated 4Nos.
72 Supply of end termination with brass double compression gland and Aluminium/Cu lugs for 3 C x 10 sq mm Aluminium (22 mm) size XLPE insulated 4Nos.
73 Supply of end termination with brass double compression gland and Aluminium/Cu lugs for 2 Pair instrumentation cable XLPE insulated 70Nos.
74 Supply of end termination with brass double compression gland and Aluminium/Cu lugs for 6 Pair instrumentation cable XLPE insulated 10Nos.
75 Supply of 50 mm width x 50 mm depth x 1.6 mm thickness size of perforated Hot, Dipped Galvanised Iron cable tray 100m
76 Supply of 100 mm width x 50 mm depth x 1.6 mm thickness size of perforated Hot, Dipped Galvanised Iron cable tray 50m
77 Supply of 300 mm width x 50 mm depth x 1.6 mm thickness size of perforated Hot, Dipped Galvanised Iron cable tray 50m
78 Earthing with maintenance free copper coated Earth rod of 3 Mtr length 20 mm dia earth rod 2Nos.
79 Providing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 100m
80 Providing 10 mm dia copper wire (Green yellow colour) on surface or in recess for loop earthing of motor, cable tray etc. 50m
81 Providing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 50m
82 I/T/C of 3.5C x 150 Sq mm size Aluminium conductor, XLPE insulated 200m
83 I/T/C of 4C x 35 Sq mm size Aluminium conductor, XLPE insulated 100m
84 I/T/I/T/C of 3C x 6 Sq mm size Aluminium conductor, XLPE insulated 100m
85 I/T/C of 3C x 10 Sq mm size Aluminium conductor, XLPE insulated 200m
86 I/T/C of 2 Pair instrumentation cable, XLPE insulated 800m
87 I/T/C of 6 Pair instrumentation cable, XLPE insulated 200m
88 Making of end termination with brass double compression gland and Aluminium/Cu lugs for 3.5Cx150 Sq. mm Aluminium (50mm) size XLPE insulated 6Nos.
89 Making of end termination with brass double compression gland and Aluminium/Cu lugs for 4Cx35 Sq. mm Aluminium (32mm) size XLPE insulated 6Nos.
90 Making of end termination with brass double compression gland and Aluminium/Cu lugs for 3Cx6 Sq. mm Aluminium size XLPE insulated 4Nos.
91 Making of end termination with brass double compression gland and Aluminium/Cu lugs for 3Cx10 Sq. mm Aluminium (22mm) size XLPE insulated 4Nos.
92 Making of end termination with brass double compression gland and Aluminium/Cu lugs for 2 Pair instrumentation cable XLPE insulated 70Nos.
93 Making of end termination with brass double compression gland and Aluminium/Cu lugs for 6 Pair instrumentation cable XLPE insulated 10Nos.
94 Installing of 50 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot, Dipped Galvanised Iron cable tray 100m
95 Installing of 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot, Dipped Galvanised Iron cable tray 50m
96 Installing of 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot, Dipped Galvanised Iron cable tray 50m
97 I/T/C of Earthing with maintenance free copper coated Earth rod of 3 Mtr length 20 mm dia earth rod 2Nos.
98 Fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 100m
99 Fixing 10 mm dia copper wire (Green yellow colour) on surface or in recess for loop earthing of motor 50m
100 Fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 50m
101 Extre Item/s if any 1Lot
102 I/T/C of extra Items if any 1Lot